Army accident investigation
What types of Army accidents should be investigated?
An Army accident with resulting total cost of property damage of $2,000 or more but less than $50,000; or an injury and/or occupational illness that results in restricted work activity beyond the day or shift in which it occurred; transfer to another job; medical treatment beyond first aid; needle stick injuries and
What determines the class of an army accident?
Accident classes are as follows: An Army accident in which the resulting total cost of property damage is $2 million or more; an Army aircraft is destroyed, missing, or abandoned; or an injury and/or occupational illness results in a fatality or permanent total disability.
Which questions should be included in an accident investigation?
Questions to ask during the investigation might include: What was the employee doing at the time of the accident? Was the employee qualified to perform this operation? Were company procedures being followed? Is the job or process new? Were proper tools or equipment being used? Was the proper supervision being provided?
What are the five main accident investigation techniques?
The following steps are a guide to performing an effective accident investigation . Step 1: Gather information. Step 2: Search for and establish facts. Step 3: Establish essential contributing factors. Step 4: Find root causes. Step: 5 Determine corrective actions. Step 6: Implement corrective actions.
What makes an accident recordable?
You must consider an injury or illness to meet the general recording criteria, and therefore to be recordable , if it results in any of the following: death, days away from work, restricted work or transfer to another job, medical treatment beyond first aid, or loss of consciousness.
What is the purpose of pre accident plan?
The purpose of a pre – accident plan is to give “control” to those in charge of either actual physical facilities, or the government agencies authorized to direct emergency operations.
What is a Class A mishap?
Class A mishaps occur when there’s more than $2 million in damage to the aircraft, the aircraft is destroyed, or its pilot or crew is killed or permanently, totally disabled.
How does using a continuity book make inspections easier?
How does using a Continuity Book make inspections easier ? Continuity Books allow program managers to identify program requirements and document actions accomplished easily. One reason for developing a pre-accident plan is: To overcome some of the confusion generated by an accident.
Which of the following best describes the responsibility of the senior occupant in an Army motor vehicle?
Additional Duty Safety Course Exam
The Heinrich Model: | All of the above. |
---|---|
Which of the following best describes the responsibility of the Senior Occupant in an Army Motor Vehicle ? Choose the single best answer. | Ensure the driver is not fatigued, or otherwise impaired, from safely operating the vehicle |
What are the 5 factors used to find the root cause of an accident?
The simple model shown in Figure 1 attempts to illustrate that the causes of any incident can be grouped into five categories – task, material, environment , personnel, and management. When this model is used, possible causes in each category should be investigated.
What are the steps in an investigation?
How to Conduct an Investigation Step 1: Ensure Confidentiality. Step 2: Provide Interim Protection. Step 3: Select the investigator. Step 4: Create a Plan for the Investigation. Step 5: Develop Interview Questions. Step 6: Conduct Interviews. Step 7: Make a Decision. Step 8: Closure of Investigation.
How many steps are in the accident investigation process?
Seven Steps
What are the six methods of investigation?
A six-step, structured approach to incident investigation (Fig 1) helps to ensure that all the causes are uncovered and addressed by appropriate actions. Step 1 – Immediate action. Step 2 – Plan the investigation. Step 3 – Data collection . Step 4 – Data analysis . Step 5 – Corrective actions. Step 6 – Reporting.
What are 4 main causes of accidents?
8 Common Causes of Workplace Accidents Lifting. Many employees are prone to sprain, strain or tear a muscle by virtue of lifting an object that is too heavy for them to lift on their own. Fatigue. Failing to take a break is another common cause of accidents . Dehydration. Poor Lighting. Hazardous Materials. Acts of Workplace Violence. Trips and Falls. Stress.
What is accident investigation in safety?
Accident investigation is the process of determining the root causes of accidents , on-the-job injuries, property damage, and close calls in order to prevent them from occurring again.